Hollow Cone Nozzle Selection Table
The table below summarises important information from the Hollow Cone Spray pattern section of the BETE Limited website. Data sheets on each product range can be accessed by clicking on the boduxt box in teh left hand column below.
| Nozzle Type | Design Type | Properties | Available spray angles | Flow rate range | Droplet Size |
| 
| Axial Whirl | Low flow rate variant | 80 and 120 | 0.417-192 | Coarse |
| 
| Axial Whirl | Narrow spray angle High velocity Metal OR plastic | 15-30 | 23.1-4660 | Coarse |
| 
| Axial Whirl | Operate at very high pressure Specialist spray drying nozzle Interchangeable swirl chambers and orifice discs | 50-80 | 35.3-5970 | Fine* |
| 
| Axial Whirl | Operate at very high pressure Specialist spray drying nozzle Interchangeable swirl chambers and orifice discs | 70-75 | 11.3-469 | Fine* |
| 
| Spiral | Energy efficient No internal parts Clog resistant High discharge velocity | 50-180 | 2.26-10700 | Coarse to medium |
| 
| Air Atomising | Very low flow rate at low pressure | 70 | 0.833-0.867 | Very fine |
| 
| Air Atomising | Very low flow rate at low pressure | | | Very fine |
| 
| Tangential Whirl | Large free passage Clog resistant Highly uniform liquid distribution | 54-83 | 15.3-2230 | Coarse |
| 
| Tangential Whirl | Large free passage Clog resistant Wide spray band | 100-135 | 15.3-2230 | Coarse |
| 
| Tangential Whirl | Large free passage Clog resistant | 70-120 | 0.125-145 | Coarse |
| 
| Tangential Whirl | Large free passage Clog resistant Extremely robust design for wear resistance. | 70-140 | 0.125-145 | Coarse |