Nozzles for lubrication selection table
The table below summarizes much of the information in the lubrication nozzle section of the BETE Limited website. It is intended to be handy reference guide to aid nozzle selection. Full data on each of the nozzles listed can be accessed by clicking on the boxes in the left hand column of the table below. The data sheets will open in a separate tab to allow easy comparisons between multiple product sheets.
| Nozzle Type | Nozzle Design | Flow Rates (l/min) | Available Spray Angles | Spray Pattern | Notes |
| 
| Elliptical orifice | 0.04-27 | 0-110 | Flat fan | Low flow rate |
| 
| Deflection | 0.16-2810 | 105, 145 | Flat fan | Wider angles |
| 
| Elliptical orifice | 0.16-2810 | 0-120 | Flat fan or solid stream | |
| 
| Elliptical orifice | 0.16-155 | 0, 30, 60 | Flat fan or solid stream | Very low profile |
| 
| Axial Whirl | 0.497-192 | 30,60,90,120 | Full cone | Square pattern available |
| 
| Axial Whirl | 0.424-8.3 | 80,120 | Full cone or hollow cone | Low flow rate full cone nozzle |
| 
| Air atomising | 0.0230-1.55 | Various | Full cone Hollow cone Flat fan | Very low flow rates Up to 8 meters projection Different spray patterns available |