Air Atomising Nozzles
Whilst not strictly a spray pattern air atomising nozzles have many unique spray properties which mean this family of versatile nozzles need their own section on our web site.
The air atomising process
In direct pressure nozzles the fluid is broken up (atomised) into droplets by either impact on a surface or by the shearing force caused by passing the liquid through a shaped orifice. In both cases the energy required for the atomisation comes from the potential energy of the fluid itself. Essentially the energy available for atomisation is a function of fluid pressure.
In air atomising nozzles pressurised air (or other gas) is used to impact upon the fluid being sprayed. The impact of the gas causes the fluid to break apart into a fine spray. This means that the energy required for atomisation is no longer dependent on fluid pressure because of this very fine sprays can be produced at low fluid pressures. The allows for very fine, low volume sprays to be delivered.
The presence of pressurized air means a greater degree of control can be exerted over the spray. By varying air pressure the shape and level of atomisation can be changed without affecting fluid pressure. The SAM advanced air atomising nozzle takes this control a step further by introducing two separate air feeds, one controls spray pattern and the other controls atomisation.
Further levels of control can be achieved by using the air feed to rapidly shut off spraying. If linked to suitable control system air atomising nozzles can be made to rapidly shut on and off many times a second. This allows for very precise spraying.
Air atomsing nozzle variants
Details on the different types of air atomising nozzle produced by BETE can be found by clicking on the items in the blue menu to the right hand side of this page.
XA Series FAQ
The XA series of air atomising nozzles is a modular system that can be configured to deliver a variety of different spray patterns. A handy PDF answering common questions on this nozzle system can be accessed by clicking on the button below.